ZHANGJIAGANG CITY PEONY MACHINERY CO.,LTD
FOCUSED ON SEPARATION SOLUTION
Add to Cart
Marine Oil Waste Oil Modular System Oil Water Separator 2000LPH
Description
Model PDSD2000-B1205Z separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.
The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.
The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.
The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
Advantages
1. Automatic piston type slag removal
2. Modular design
3. Automatic operation
Main Technical Specification
| Discharging type | Full discharging | |
| Rated capacity(L/h) | Diesel recommended processing | 2200 |
| SAE30/40 Lubricating oil is recommended
| 1000
| |
| 180 CST fuel oil recommended processing
| 1000
| |
| 380 CST fuel oil recommended processing | 800 | |
| Motor power(kW) | 4 | |
| N.W.(kg) | 470 | |
| Dimension(L×W×H) | 1250*1000*1700(mm) | |
The Whole Unit Consists of
1. Separator 2. Screw pump 3.Electric control box 4. Steam heater 5. Temperature adjusting valve 6. High temperature ball valve 7. Steam trap
8. Temperature sensor 9. Pneumatic Three-way valve 10. Stop-check valve 11. Oil filter 12. Vacuum gauge 13. Pressure gauge 14. Air pressure reducing valve
15. 3/2 Solenoid valve 16. Ball valve 17. Brass filter ball valve 18. Water pressure reducing valve 19. 2/2 Solenoid valve 20. 2/2 Solenoid valve
21. Pressure switch 22. Moisture sensor 23.Skid
Model Condition for Mineral Oil Separation and Actual Capacity(refer to the chart)
|
Oil types | Fuel oil | Lubrication oil | ||||||||||
|
Fuel oil |
Heavy fuel oil |
SAE30,40 |
Detergence oil |
Steam turbie oil | ||||||||
| Kinematical viscosity(mm2/s) |
1.9-5.5 |
5.5-24 |
120 |
180 |
380 |
100-120 |
61.2-74.8 | |||||
| 40℃ | 50℃ | 40℃ | 40℃ | |||||||||
| Density/(kg/m3)(20℃) |
＜900 |
900-991 |
880-900 |
＜900 | ||||||||
| Separating temperature (℃) | Normal temperature, 40-60best |
90-98 |
80-95 | |||||||||
| Recommended capacity (l/h) |
2400 |
2000 |
1100- 1200 |
900- 1000 |
700- 800 |
1000-1200 |
500-600 |
1600-1700 | ||||
| If you have special requirement, Please connect with us. | ||||||||||||
Spot pictures
Processing equipment
Certificate
Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to reward you with a better quality in return for our interest in and faith toward. We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.