ZHANGJIAGANG CITY PEONY MACHINERY CO.,LTD
FOCUSED ON SEPARATION SOLUTION
Add to Cart
Disc Type Marine Oil Cleaning Centrifuge Disc Stack Centrifuges
Description of high-speed centrifuge
Model PDSD separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil, and other mineral oil in marine diesel engine units and land-used diesel generator units of power stations so as to reduce wear of the diesel engine and other machines, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove a small number of solid particles from the liquid.
The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation, and economic maintenance cost.
The clear oil and dirty water are pumped out by a centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for a long time with low vibration, safety, and security.
Disc centrifuge, disc separator -Whole unit
With a heater, pumps, valves, frames, control panel, etc.
Main Technical Specification of high-speed centrifuge
Condition for mineral oil separation and actual capacity (refer to the chart)
| oil types | heavy diesel oil | lubrication oil | |||||||
| SAE30, 40 | detergence oil | steam turbine oil | |||||||
| kinematical viscosity(mm2/s) | 13 | 20.5 | 36.2 | 80 | 100-120 | 61.2-74.8 | |||
| 50°C | 40°C | 40°C | |||||||
| density/(kg/m3)(20°C) | less than 900 | 900-991 | 880-900 | less than900 | |||||
| separating temperature (°C) | 40 | 60 | 80 | 80-95 | |||||
| recommended capacity (L/h) | 900-5000 | 300-4500 | |||||||
| oil types | Fuel oil | ||||
| Fuel oil | Heavy fuel oil | ||||
| kinematical viscosity(mm2/s) | 1.9-5.5 | 5.5-24 | 120 | 180 | 380 |
| 40°C | 50°C | ||||
| density/(kg/m3)(20°C) | less than 900 | 900-991 | |||
| separating temperature (°C) | Normal temperature,40-60degree best | 90-98 | |||
| recommended capacity (L/h) | From 650L/H to 5000L/H depends on different oil and working temperature. | ||||
Note: Refer to the above chart, we will provide a suitable capacity separator.
Processing types of equipment of high-speed centrifuge
Peony Centrifuge has been dedicated to producing machinery and types of equipment and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to rewarding you with better quality in return for our interest in and faith in you. We will do our utmost for one more stepping forward, based on our infinite services and trust in customers.